Price: $300,000
- THIS ITEM WAS SOLD OUT-

Please find enclosed the photos, and information on our mining plant. The plant was designed and used to recover courseas well as all fine gold, silver, platinum and black sands.

The option to use the surge tank & Denver SRL Pump between the Screen and the 4 plex- jig was done to additionally abrade the ½” minus prior to hitting the jigs.

The 18” x 10’ cross conveyor takes the material riding the bottom deck of the screen out the side to a 42” Duplex jig. We have 1” square screen cloth opening on the top deck and ½” square on the bottom. This allowed us to take the 1” to ½” clean rock over the jig to recover any larger nuggets. 

The option available to assist in the recovery of fine gold, silver, platinum and black sands is to take the material from the 4 plex hutches – directly to the Sala pump bypassing the Neffco Bowls at that point and pump it up to the another 42” Duplex jig to make another cut on it. Then, the hutch material would go into the Neffco Bowls. If there is a lot of black sand this would give the Neffco Bowls an additional chance. 4 bowls would be set up with 2 in service, change- over would be quick, while 2 are cleaned.

All of the plant components you see on the list are in very good condition. All of them were new or reconditioned as necessary prior to shipping them up from Oregon in late 2004. The submersible pump was sent out for rebuild as were some electric motors as required. We have run about 6000 yd’s.

The submersible pump is used for fresh water supply to all plant components.

The Jaeger/Sykes Diesel and the Homelite Pump are both used for excavation pumping if required or dirty water away from the plant etc.

The dual Neffco Bowl System is used to process concentrates.

The plant is dismantled, mostly ready for shipping and is stored in northern B.C.

All plant & equipment are free of any liens or encumbrances and we can guarantee clear title.

The price for everything you see on the list is $300,000.00 U.S. funds

I would ensure everything was ready to ship and would get it loaded onto your trucks.

If you were interested, I could be available to assist in setting up the plant at your site. If you require any additional information or I can be of any help, please do not hesitate to call.

Sincerely,

= Owner = (of sold plant)

PLACER MINING  PLANT (description):

Portable Wash Plant

·         Mounted on: Morse Bros. 48’ x 8’ Tandem axle air ride carrier S/N1M9X24926FA237001

·         Single axle dolly for onsite moving

·          7’ X 12’ feed hopper, w/grizzly, w/variable spacing

·          Hydraulic 15 hp power unit to raise & lower grizzly

·          36” X 28’ belt feeder w/size 6, 25/1 shaft mount reducer &15 hp variable speed motor

·          Pioneer 5’ X 12’ 2 deck wash screen w/20 hp drive,

·         Water manifold w/2 3” Keckley strainers,12 spray bars w/11 brass spray nozzles each

·         24” X 20’ cross conveyor w/5 hp drive, top deck oversize (removes for shipping)

·         18” X 10’cross conveyor w/3 hp drive, bottom deck (removes for shipping)

·         18 spare grizzly bars

Pan American  42” X 42”  Quadruplex Mineral Jig  S/N 1672 & 1673

•  variable stroke, 5 hp drive, steel shot, mounts on stand with Neffco Bowls

Pan-O-Matic  42” X 42” Duplex Mineral Jig  S/N 388

•  variable stroke, 5 hp drive, steel shot

American Balanced 42” x 42” Duplex Mineral Jig, S/N 0135

• variable speed & stroke, 5 hp drive, steel shot

Torgerson Machinery 36” X 25’ Sandscrew S/N 41-111

• 15 hp drive

Four– single Neffco Bowl Mineral Recovery System

• S/N  n/a

Sala 2” Slurry Pump SPV 181 S/N 26499-3A

•  5 hp drive 

Svedala  5” X 5” SRL Pump   Model 531891, S/N 01-196894-001

• 25 hp drive

Balzer  6’ X 8’ X 6’ Surge Tank with intake for Svedala pump S/N J-8998

Gorman-Rupp 6” submersible pump,  model S6C1,  S/N 817776

• 35 hp
• 3’x 3’ X 2’,  24 sq/ft wedge wire screened pump intake (5/64” opening)

Reliance 18’ tandem axle enclosed van w/pintle hitch  S/N 63201   

• Caterpillar 3306,  150 kw generator    S/N 79834-2
• 200 gallon fuel tank on stand, mounts on frame for traveling
• wall mounted switch gear, 16 circuit breakers & motor starters sizes 4,3,2,1
• variable speed /soft start control for 15 hp feeder motor
• 2600 lineal feet of rubber clad S/O motor cable  

Two -  8’ X 7’ Product chutes, wash plant to jigs & jigs to sand screw

500’ 6” lay-flat hose & miscellaneous 3”, 2” lay-flat hose, pipe & fittings

Jaeger/Sykes 6” X 6” trash pump, model 6PTD, S/N 800 4 001

• Detroit 353 rebuilt diesel
• 20’ intake hose

Homelite 3” trash pump,

• 8 hp Briggs & Stratton
• 20’ intake hose

8’ X 20’ dry container w/miscellaneous chains, tools, steel & supplies

100 gallon pick-up fuel tank

• 20 gpm 12 volt pump

Lincoln air powered grease lubricator  w/hose Model 082050, S/N 016855 (in generator van)

NAPA air compressor, model B2-1034, S/N G10649 (in generator van)

• 11 hp Briggs & Stratton engine
• 20 gallon tank and hoses

Solar Battery Charger 12/24 volt Model 141-288-901, S/N F508308

Lincoln 200 amp gasoline welder  S/N 1074105

• Lincoln LN22 wire feed

Surplus steel & stainless steel jig shot

Neffco Dual Bowl System, w/distributor box

Parts for 40’ conveyor, head & tail pulleys, t/rolls, belting

Cat 988  S/N 87A7720

Mitsubishi  MS-180-LC  SN 9011

• 3 buckets 

Note: have general information and production curves for all pumps.